Plastic Tubing
Plastic tubing of various lengths and bores constructed of materials suitable for general laboratory, biopharmaceutical, food and beverage, medical, vacuum, low-pressure, high-pressure, cleanroom or environmental applications. Products may be chemical- or corrosion-resistant. Formulated for resistance to flex fatigue and abrasion, plastic tubing is more flexible and less permeable than rubber tubing.
How Is Plastic Tubing Used?
Flexible plastic tubing may be used as transfer lines for contamination fluid control, hydraulics, protective jacketing, vacuum pump and diaphragm pump feeds and discharges, refrigeration, water and fluid lines, food and beverage, instrumentation, research laboratories, agriculture, material handling, air and gas lines, chemical lines and pharmaceuticals.
Types of Plastic Tubing:
• PVC: lightweight and flexible, will retain its bore on bending and can be sterilized up to 121°C
• Silicone: ideal where a hard-wearing material is needed, including transfer of liquids or higher temperature environments
• LDPE: good for general low pressure and temperature, instrumentation, corrosive atmosphere, and food processing
• PTFE: has excellent chemical-resistant and temperature-resistant properties
• PE: flexible, lightweight, durable, and corrosion resistant, used for a wide range of liquid, gas, and fluid transfer applications
• FEP: clear, small-diameter tubing, the economical choice for chemical resistance and broad temperature exposure
• PEEK: high-performance polymer with mechanical and chemical resistance, and highly resistant to thermal degradation
Pacer Global LLC Saint-Gobain - SaniTech Ultra-65 Tubing, 0.375'' ID, 0.625'' OD, 0.125'' Wall, 50 Foot Coil, 1/EA - Ultra65-375-4F
Saint-Gobain - SaniTech Ultra-65 Tubing, 0.375" ID, 0.625" OD, 0.125" Wall, 50 Foot Coil, 1/EA
AVANTOR MASTERFLEX (VWR LLC) TUBNG PHARMEDBPT 0.19MMID 100F
Masterflex Ismatec Pump Tubing, PharMed BPT, 0.19 mm ID; 100 ft, Avantor
AVANTOR MASTERFLEX (VWR LLC) TBNG TYGON 2001 1.02MM ID 33FT
Masterflex Ismatec Pump Tubing, Versilon™ 2001, 1.02 mm ID x 2.72 mm OD; 33 ft, Avantor
AVANTOR MASTERFLEX (VWR LLC) 3-STP VITON 1.42MMID 12PK
Masterflex Ismatec Pump Tubing, 3-Stop, Viton, 1.42 mm ID; 12/PK, Avantor
Braintree Scientific Polyethylene .034"""" x .060"""" Per Ft.,1000 ft. Continuous
Polyethylene Tubing Polyethylene is a relatively rigid polymer suitable for short-term catheterizations and for ex vivo applications. Polyethylene sleeves can be slipped over less rigid catheter materials (MicroRenathane, RenaSil™) at suture points to protect the latter from inadvertent constriction **Sold for research purposes only and not for human use**
Braintree Scientific Polyethylene .017"""" x .030"""" Per Ft., 500 ft. Continuous
Polyethylene Tubing Polyethylene is a relatively rigid polymer suitable for short-term catheterizations and for ex vivo applications. Polyethylene sleeves can be slipped over less rigid catheter materials (MicroRenathane, RenaSil™) at suture points to protect the latter from inadvertent constriction **Sold for research purposes only and not for human use**
Braintree Scientific Polyethylene .017"""" x .030"""" Per Ft.,1000 ft. Continuous
Polyethylene Tubing Polyethylene is a relatively rigid polymer suitable for short-term catheterizations and for ex vivo applications. Polyethylene sleeves can be slipped over less rigid catheter materials (MicroRenathane, RenaSil™) at suture points to protect the latter from inadvertent constriction **Sold for research purposes only and not for human use**
Accuflow Systems 3/4 Inch Silicone Hose
3/4 Inch ID Platinum Cured Wire Reinforced Silicone Hose 72 Inches OAL
Grainger Hose Adapter 1-1/4 NPTM 3/8 NPTM
The Grainger Approved Hose Adapter is a brass hose adapter that connects 3/4 in. hose ID to 1/2 in. male pipe thread. It has a maximum pressure rating of 300 PSI and temperature rating of 250°F. This adapter allows you to connect a 3/4 in. ID hose to 1/2 in. NPT pipe fittings and valves. Made from brass for durability and corrosion resistance.
AVANTOR MASTERFLEX (VWR LLC) Masterflex Transfer Tubing, C-Flex, Clear, 5/16"" ID x 7/16"" OD; 25 ft
Applications: Pharmaceutical, biotech, and general-purpose lab uses requiring high performance. Economical alternative to platinum silicone. Characteristics: Exceptional tensile and tear strength, good biocompatibility, excellent chemical resistance, low gas permeability, and a smooth surface. Transparent. Certification: Product is manufactured in accordance with Part 820 Quality System Requirements (GMP); and meets USP Class VI. Temperature range: -40 to 275¿F (-40 to 135¿C) Sterilize: Autoclave, ethylene oxide, or gamma irradiation.
Pacer Global LLC Saint-Gobain - SaniTech-65 Tubing, 0.0625'' ID, 0.1875'' OD, 0.0625'' Wall, 25 Foot Coil, 1/EA - STHT65-062-2
Saint-Gobain - SaniTech-65 Tubing, 0.0625" ID, 0.1875" OD, 0.0625" Wall, 25 Foot Coil, 1/EA